How to carve a pumpkin like a pro in 5 simple steps

Here's how to carve a pumpkin step-by-step for pro results, no matter how detailed your gourd design...

A pile of carved glowing pumpkins
(Image credit: Martin Deja Getty Images: 1184857940 )

Knowing how to carve a pumpkin properly is a must when fall comes around. Not only do gourds make perfect seasonal decor but they are the hallmark of one of our favorite holidays of the year: Halloween. 

Some may shy away from this classic Halloween decorating idea, overwhelmed by the complexity of a design or by gourds of the past gone wrong. However, with the right tools and technique you'll be able to tackle pumpkin carving like a pro, year after year.

What is the best way to carve a pumpkin?

Devan Cameron, chef and owner of Braised & Deglazed, a food-focused website with recipes, tips and inspiration for the home cook says that having the right tools to hand and planning out your pumpkin carving design is the best place to start.

'Unless you’re an established freestyling artist, then you’ll probably want to plan out the design of your pumpkin with either a stencil or from a picture. I like to find a pumpkin carving stencil online and trace this onto the pumpkin with a light marker. Starting from the top of the pumpkin, follow the lines of the stencil with your pumpkin knife until you achieve your perfect pumpkin design.' Your approach really will depend on the carved pumpkin design you're looking to recreate or rather, bring to life!

Carved pumpkins

(Image credit: Unsplash/Bekir Donmez)

How to carve a pumpkin step-by-step

As Cameron suggests, the first thing you'll need to decide is on your design. You could go for a simple cut-out design, or a more intricate two-tone design where parts are shaved off rather than completely carved out. For either type of design, you will need:

  • A sharp, serrated knife or pumpkin carving knife 
  • A small kitchen knife
  • A table spoon
  • A marker or pen
  • A pin and paper if doing a two-tone design
  • Bleach or all-purpose disinfectant

Top tip: Pumpkin carving can get a little messy, so we like doing it out in the garden, but you can do it in the kitchen – just make sure whatever surface you'll be carving on is lined with newspapers. 

Choosing a pumpkin is also important. The larger, more evenly surfaced the pumpkin, the easier it will be to achieve a neat design. Avoid pumpkins with too many grooves and imperfections. 

Step one: Carve from the top – at a 45-degree angle

Cut out the top section of your pumpkin. Don't just slice it off, though: cut in at a 45-degree angle, using your pumpkin carving knife. You want the lid to be fairly small and neat.

Melissa Collins, Partnership Manager at Perfect Brew recommends, 'To make the lid, draw a circle with a V-shaped notch on the rear. This notch will be used to guide you while replacing the lid.'

'If you want to use your pumpkin to hold a candle, cut a hole in the bottom of it. Make sure the aperture is large enough to reach inside and scoop up the contents once it's been sliced.'

'When cutting a lid, slant the blade toward the pumpkin's centre to create a ledge that will support the lid. If you're going to cut a bottom, go straight through the pumpkin.'

Carving a pumpkin from the top

(Image credit: Alice Day: Getty Images 688938389 )

Step two: Scoop out the seeds and flesh carefully

Scoop out the pulp and seeds and set aside. Now, begin scooping out an even layer of the flesh with a spoon. Leave a little bit of the flesh on the inside, though: if the walls of your pumpkin get too thin, you may find that the carved-out design snaps in places. 

Collins says 'Remove the seeds and threads from the pumpkin's inside. Use a big spoon, ice cream scoop, or a plastic scraping scoop developed specifically for this task.'

'Scrape the interior pulp away from the carving region of the pumpkin until the pumpkin wall is about an inch thick.'

Step three: draw out your design

Draw or trace your desired design on the pumpkin with a marker, pen, or pencil. 

Now, begin carving out your design using the carving knife. Always cut at a 45-degree angle rather than straight in: you'll make fewer errors, and the openings will let in more light. For very small bits like the eyes, you may need to go in from the inside to make enough of an opening. 

Jason White, the founder and CEO of All About Gardening recommends etching for a professional finish when carving your pumpkin. 

'Etch the details on your pumpkin surface to give it depth and 3D volumes and make it stand out like a pro. Etching will give your pumpkin design shade and texture by giving it highlights.' 

'Plan the parts of your design where you want certain shadows and light to be, and strategize your carving and etching around this. Carve shallowly for the areas you want shadowed and carve deeper for the areas you want to have brighter highlights.'

Carving a pumpkin design

(Image credit: Alberto Jose Moreno jurado Getty Images)
Top Pumpkin Carving Tips

Top tip: If you're doing a two-tone design with shaved bits, first draw your design on paper, pin it to the pumpkin, and make a carving map by pricking the surface of the pumpkin with the tip of your knife or with another pin. Then, make a thin incision along the perimeter of your design. Shave small bits of skin off with a kitchen knife, always away from yourself, stopping at the boundary you've made. Always do the shaved bits first, the carved-out bits second.

Laura Ritterman, a cook, recipe connoisseur and household decor enthusiast says, 'Try incorporating extra facial features like eyebrows, eyelashes or small holes for freckles. Adding more dimension to your pumpkin really brings it to life and looks much better than a simple jack o’lantern.'

'Always trace out the places you are going to cut so you have a guide and the face or sculpture does not turn out lopsided.'

Step four: Neaten up your design with rubbing alcohol

Now, go over the edges of your cut-outs with a sharp kitchen knife, smoothing over any uneven cutting. This will help achieve a neater finish.

Clean up any messy work, Ritterman says to 'Use rubbing alcohol or nail polish remover to take away any left over markings from the marker. I also like to use a ruler or tape measure to make sure the eyes line up and the mouth is not too far to one side.'

Step five: Help your pumpkin last longer

Give your pumpkin a bath in a disinfectant solution. The simplest thing to do is just fill your kitchen sink with water and add a bit of bleach, and then submerge your pumpkin in the solution for a couple of minutes. This will help your pumpkin last longer, stopping the remaining flesh inside from rotting too quickly.

Ritterman opts for the bleach method also: 'Once you have the initial carving, make sure to double back and smooth out any rough edges with a knife or sandpaper. Once you have the face done, make sure to dunk your pumpkin into a water and bleach mixture to make your pumpkin last all the way through Halloween, and use battery operated tea lights to not turn the inside of your pumpkin black.'

If you'd rather not use bleach, covering yours in petroleum jelly is also a good way to help it last. This is also a great hack to stop squirrels eating pumpkins...

pumpkin carving

(Image credit: Unsplash/Kelly Sikkema)

Can you carve a pumpkin with a regular knife?

Cameron suggests not, saying 'My best advice for carving pumpkins is to buy the right knife. I see so many people grab a dull straight-edged knife from their kitchen drawer and this is a terrible mistake. The perfect knives for pumpkin carving are the small serrated knives that can be found at Halloween stores. The serrated edges help to cut through the tough skin of the pumpkin and the small thin blades can efficiently cut curved shapes into the pumpkin.'

Ritterman adds, 'I always buy fresh pumpkin every year to make pies, cookies, squares, soups and pastas because it is so much better than canned. I also love to scoop out the insides to get the seeds and roast them. Because of all of this pumpkin cooking, I always have so many around fall and I carve so many to decorate my front porch.'

'It is important when carving a pumpkin to have a sharp knife, big and small. A big one to cut the top off, and smaller paring knife or sharp carving tool for the facial features.'

How to save pumpkin seeds for planting

If you have the space to grow pumpkins in your garden, don't discard the seeds. Having said that, not all pumpkin seeds are worth saving: the ones from hybrid cultivars will not grow into the beautiful orange pumpkins we use for Halloween. So, always ask what type of pumpkin you're buying. If it's an heirloom pumpkin, you will want to save the seeds:

1. Rinse the scooped out pulp and seeds under cold water, separating the seeds from the pulp. Do this very thoroughly: if any pulp remains on the seeds, they will likely rot.

2. Dry the seeds as much as you can with paper towels and place of a baking sheet or newspaper.

3. Dry off in a cool, dry place, until completely dry. This will take several days. Don't dry in direct sunlight.

4. Place the dry seeds in a paper bag; store in a cool, dry cupboard or pantry until they're ready to be planted in the spring.  

SPONSORS