Get in touchTelephone: 02031 980 473
Location: All UK & Northern Ireland
Self-undercoating gloss for Interior & Exterior woodwork, Int. floors & painted metal
Coverage: approx 12m2/litre per coat on non-porous surfaces. VOC content <0.1g/Litre
Prep - Remove any loose, dusty or flaking material. Use only high quality fillers – seal with this product diluted with 10% water. Substrate must be clean and dry (no dirt, oil, grease etc). Previously painted wood or metal surfaces need a light rub-down with sandpaper. Bare hardwoods need priming. Concrete must be dry & dust-free; dilute first coat with 15% water.
Paint - Drying time: approx one hour with light ventilation. Stir well to ensure the paint is completely mixed. Apply 2-3 coats with a short pile roller or fibrillated brush, leave 8 hours between coats. TIP: drying may take longer in very cold or humid conditions. If the colour change is very strong, more coats may be required. Outdoors & Floors need 3 coats. Do not lay-off. Cleaning – with a wet sponge, do not use harsh, abrasive, alkaline cleaners. Full cure & hardness is achieved in approx 10 days – avoid washing, wetting or abrasion for this time.
Clean-Up - wash equipment, brushes and rollers in water.
Storage - Store paint in dry conditions away from frost & heat.
Health & Safety - this product is considered to be non-toxic and safe – but do not swallow and keep out of the reach of children.