Before & After: A simple freehand wall stencil design adds character to this entryway

A freehand herringbone wall stencil design adds a ton of character to this entryway

Stenciling an entryway wall with a herringbone pattern
(Image credit: Dori Turner)

Good first impressions are important. Just like you want to make a good impression when you first meet someone, you want to make a good impression when you welcome people to your home! Your entryway is the first thing guests see when they walk in your house and it can set the stage for the rest of the feel of your home. 

Our entryway was very clean looking, but very boring. We had given the walls and trim a fresh coat of paint when we first moved in but it had remained largely untouched since then. We’ve done a ton of work to the rest of the lower level of the house, but you couldn’t tell when you first walked in the door so I decided it was time for a change and that a bit of an accent wall would be the perfect way to add interest to this spot. 

(Image credit: Dori Turner)

The entryway wall before: 

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)

The first step was to add some board and batten. I love how it turned out but the rest of the wall still seemed a little plain. I went back and forth between adding wallpaper or doing a stencil.

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)

In the end, I decided to do my own DIY stencil wall mimicking a pattern I had seen available online. The lines in the pattern weren’t perfectly straight and it almost resembled a broken herringbone design because the lines didn’t connect – but there’s beauty in imperfection sometimes, don’t you think? Plus, it gave me more confidence that I could replicate the pattern using my own materials I already had on hand! It felt like a really unique way to personalize our entryway – without spending tons of cash.

Here are the supplies I used for this DIY project:

  • ¾” electrical tape
  • Ruler
  • Pencil
  • Detail artist paint brush
  • White interior paint (satin finish)
  • Gray interior paint (satin finish)

1. Freshen up the walls

I started by painting the walls with two fresh coats of paint. The rest of our entryway is a bluish gray, but I chose to go white on this wall to create more of a focal point. I chose gray paint for the lines. You can definitely choose whatever entryway or hallway paint colors work best for your home!

2. Mark up the wall for stenciling 

Once the paint was completely dry (you don’t want the wall to be even a little sticky or the tape will remove the finish), I found the center of the wall and used a pencil and ruler, marking off every 5 inches vertically down the wall. The marks helped me line up the electrical tape in a straight line. You want to start in the center of the wall so the pattern works out to be equal on both ends. The center of my wall was in an awkward place because of the closet door, but we made it work.

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)

3. Finish lining the entire wall

Once you’ve made your first vertical line with the tape, decide how far apart you want the next line to be. The closer the next piece of tape, the shorter the gray lines will be. The farther away the longer the gray lines will be. It’s completely up to you and the look you’re going for! I chose to place my next piece of tape 2 inches away from the center piece. 

You will repeat this process on both sides of the center piece of tape until you have lined the entire wall. This could be a tedious process if you’re looking to do a large wall, but for my small entryway wall, it was perfect!

4. Start painting the diagonal lines

Once your tape is in place, you’re ready to begin making the diagonal lines. Starting in the center of the wall again and starting at the top, take your artist brush and contrasting paint and begin freehanding your slants. For this part, I chose not to measure. I just eyeballed the distance between the diagonal lines and every so often stepped back to make sure the distance apart was relatively the same.

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)

5. Move onto the next section and finish up

Once you’ve finished your first section of diagonal lines, you’re ready to begin on the next section. This time you’ll do your lines in the opposite direction of the first section, roughly matching up the starting point of each line with those on the previous section. Repeat this process in each section until the wall is complete.

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)

Carefully peel off each piece of electrical tape, then step back and enjoy your beautiful DIY stencil wall!

The results:

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)

This project was easy and inexpensive since I had most of the supplies already on hand! It only took an afternoon of my time to complete it and I’m thrilled with the results! We added a table my hubby built specifically for that space and, after adding some decor, our entryway is now a welcoming hub for our guests! It makes a great first impression and ties everything together for a cohesive look throughout our home.

Stenciling an entryway wall with a herringbone pattern

(Image credit: Dori Turner)
Dori Turner
Dori Turner

Dori Turner writes blog posts and feature articles on affordable design and DIY from her home in the heart of Oklahoma. She has a passion for teaching others how they can transform their home on a budget.

SPONSORS